Reply to thread

Message: <blockquote data-quote="OnyxCobra" data-source="post: 595812" data-attributes="member: 8293">the oil cooler and the hardlines that run down to it were removed, hopefully this can show you what you'll be looking at.first pic shows the oil cooler lines installed and connected.<img src="http://onyxcobra.googlepages.com/CobraProject3.jpg/CobraProject3-full.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />now notice once its removed you're left with the two open coolant ends, one on the heater core line and the other on the water pump. basically you're just bypassing the whole coolant lines running down to the oil cooler and back up.<img src="http://onyxcobra.googlepages.com/CobraProject38.JPG/CobraProject38-full.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />The hose is NOT connected yet in that pic, but you can see two open ends, one on the water pump and the other one is almost straight up on the heater core coolant line. That's where you need to run the hose, if you want me to go take a pic for you of the hose let me know. Hope this helps.</blockquote>