Reply to thread

Message: <blockquote data-quote="Saint" data-source="post: 955349" data-attributes="member: 16561">Check the ground an connections at the starter, the stock engine to frame ground is a joke. also if it started before you replaced the intake and there was no ground from your intake to firewall then I doubt it's a ground issuetry resetting the computer, by leaving the positive cable hooked up and removing the ground cable for 10 minutes...then hook the negative cable back up and hold the key in the on position for roughly 20 secondsor bang on the starter while someone tries to crank the car...if it starts then replace the starterif that doesn't work then check voltage between - and + on the battery terminal with key in on positionif none of that works then it's above my off the top knowledge about no start issues after replacing the intake.</blockquote>