Reply to thread

Message: <blockquote data-quote="98-5.0" data-source="post: 559330" data-attributes="member: 9042">not necessarilyforgot to add. if its stock valve springs and you rev it alot, those stock springs are junk even brand new and you will valve float just like my motor did.. you may not hear it if your ears are untrained to hear it. that being said. if you are floating valves, sure you can bend one but, that guide is taking a beating at the same time to.. if the guide is worn out and have alot of play in it, then you are not sealing the combustion chamber.(like stated above in a previous post) which is leading to part of the noise.. my motor did this same thing...sound was very simular and i had zero (0) bent valves. i never had bent pushrods or rocker arms either.</blockquote>