Reply to thread

Message: <blockquote data-quote="96_SVT_Cobra" data-source="post: 610411" data-attributes="member: 11185">Ive been modding it for a little over 3 years now. so here it goes, im going to try to remember all the stuff thats in it so far. still has a decent amount left to do but hopefully in a couple years it can be complete.here is what has been doneMotor and Drivetrain-built teskid block--bored 20 over with all the other align honing, stock cobra crank sent out to be rebalanced and polished, manley forged rods and manley forged and coated pistons 9.2:1 compression-5 angle valve job on b heads along with redoing all the valves, valve guides, retainers, springs, etc with high perfomance parts. then topped it off   with FR500 cams-Vortech T-trim -custom piping for intercooler(no longer intercooled, going to try meth instead for a few, in the process of putting it in) with blow through MAF, modified  Tial BOV, AFM power pipe-BBK o/r x-pipe-flowmaster catback-walbro 255 with BAP-60lb injectors-BAS-ngk spark plugs-04 cobra radiator-RPS clutch and Cyn-r-gy aluminum flywheel-stock t45-pro 50 shifter-FRPP aluminum driveshaft-4.10 gearsChassis and Suspension-eibach sportlines-tocico shocks and struts -steeda lower control arms-aluminum steering shaft-steeda STB-sub frame connectors-10th anniversary cobra brakes with slotted and crossdrilled rotors-battery relocated to trunkInterior-alpine cd player-MMR rear seat delete with aluminum back-spare, jack, and wrench was removedExterior-all stock cobra body panels-Ford GT rims, 18x9 18x10-euro clear headlights (not sure if thats what they are called)-LED third brake light*im sure im missing stuff, filling this out while at work*What I am planning on doing:-black interior swap with a few red accents and red cobra floor mats (have the parts except new seats and have to order the floor mats)-LED cluster and HVAC (on there way, going to install while doing the swap)-HID's 6000k headlights and fogs-Kooks headers and x pipe, with side exhaust or dumps (havent decided)-IMRC deletes-T56 viper spec-31 spline diff-31 spline mosor axels -black and red racing seats-max out t-trim, maybe upgrade to YSI on 22+ psi-new paint when everything else is donewill add more when i can remember.--Aaron</blockquote>