Reply to thread

Message: <blockquote data-quote="BigBore96" data-source="post: 1050822" data-attributes="member: 17566">Its not the intake.    0 coolant running through them.   Chances are its the back of the head with a tube connected to it out of a freeze plug hole.   My mind is pulling a blank right now on proper terms.    You can't miss it though.   Its got the heater hoses connect to it.   Highly likely the hoses going bad or the part that's bolted in the head itself, although its not as common.   Either way if either is your problem then its an easy fix.   You don't have to worry about the intakeOnce you are finished,  you should flush the coolant, drill some holes in the t stat, and properly burp the system and it should be good to go.</blockquote>