Reply to thread

Message: <blockquote data-quote="e.phillips1113" data-source="post: 1493072" data-attributes="member: 29026"><p>I believe I've found a work around to my problem. In much the same idea as Adfalenski, I'll use metric bubble to NPT adapter. The tricky part is the only M12x1.0 bubble to NPT adapter I've found is 1/8"x27NPT which has a major diameter less than 12mm (~10.3mm). But, I've found a secondary adapter that goes from 1/8"x27NPT to 1/4"x18NPT. So, I should be able to tap out the striped hole to 1/4"x18NPT and use both adapters to successfully resolve my problem. Any further thoughts? Ideas? Worries?</p></blockquote><p></p>