Reply to thread

Message: <blockquote data-quote="98-5.0" data-source="post: 412966" data-attributes="member: 9042"><p>this is the route i would go....if you dont want it all together and the bonus to you is less weight and more room and simpler system....then i would spent the $30 bucks or so and go to the junk yard and take the front lines off of another non-abs v6 or v8 sn95 car and be done....that way its like stock non-abs and for piece of mind....thats what my buddy did to his and his wifes.....i baught mine without it for a reason...they do get in the way and you honestly dont need it....abs system was only designed to allow the driver to have more controll of the car under extreme braking conditions......abs in fact takes the car longer to stop (stoping distance) think about it....more friction is better under stoping right....whats more a locked up wheel or a wheel that is being pulsed by a hydrolic unit....but thats what i would do to make it clean and right...but theres always the other ways....like just making little pieces of line.....the sensors can be unpluged and tosed and the light in the cluster youll probably want to pull unless it wont bother you...ie...the rear sensors run up through the back seat so the but rest of the seat needs to be pulled out....just get in and yank up really hard on each side, front side of rear seat and about in the middle of the front seats if your looking at them from behind.. if that makes sense....it can be a batch....the socket for the sensors is a inverted star socket if you dont have them..or vise grips might work if had to...thats about it.....either way is fine i just perfer the getting the lines from a donor car....junk yards will think your crazy for goin for brake lines and give them to you cheap as dirt ...kinda makes it worth it...thats my $.02</p></blockquote><p></p>