Reply to thread

Message: <blockquote data-quote="Woody6799" data-source="post: 915243" data-attributes="member: 15356">I used the 94 column not the 99 column, could that be a problem right there? Different mounting points? So being that it is a telescoping shaft would it be possible to drop the column again, compress the shaft and remount or is there a better way to compress it before I try to recenter it like you state at the end of this?fixed this already, switched harness plugs and all.  I had a full dash with harness from the 03 so I was able to swap what I needed to get the bags to plug and the fog/defrost/TC switches to be functional.  I am still using the original 94 harness but I had to drop it to swap the dash.  I came to the conclusion that the shaft either moved during the drop or during the changing of the wheel.  I red on here a post about Onyx I believe (may be wrong) bending his shaft doing exactly what I did.  However, it could have telescoped out when I dropped it to pull the dash...edit:Thats great info, I will look into it more, idk if my 94 has it but I am almost positive those triangles are there... I know I am not binding on anything but the firewall, I checked that a few times.</blockquote>