Reply to thread

Message: <blockquote data-quote="chevyjunk" data-source="post: 546883" data-attributes="member: 11260">:BangHead: Really need help here guys. And am taking this as the bible to my my 94' gt engine upgrade. We all can agree on the fact that I am a virgin here and have put alot of time and effort along with some well needed cuffs along side of the head during this learning experience to all of this. I finally have a set plan of attack which includes: ALONG WITH MONEY A LITTLE TIGHT.1) block is at machine shop already getting hot tanked and jet washed. Then upon piston selection of to which is: Pistons, Hypereutectic, Press Fit Pins, 4.030 in. Bore, Flat Top, Four Valve Reliefs,Ford,Small Block,Set of 8Part Number: SUM-17302-30  They will bore. 2) Crankshaft is at another machine shop getting magna fluxed and ground. Is needed as far as I have been informed. This same shop is going to balance the rotating assembly for me.3)Then Rotating assembly along with ford camshaft b303 will be assembled by original shop doing the bore.ALONG with allof this I am switching to a 93/cobra replica upper/lower with cast gt 40 heads and crane rockers, my question is will all of that work with my computer</blockquote>