Reply to thread

Message: <blockquote data-quote="98-5.0" data-source="post: 423967" data-attributes="member: 9042"><p>well i got my 408 ready to rock...just got my 90mm mass air,90mm tb, and 60lb injectors....and now comes the tuning.....the guy from modular depot is goin to do the chip on my t4mo computer...i want to eliminate all the wiring out of the harness i can ..this is a race car not a every day street glory...so with thta being said....i just want a clean setup .... aftermarket guage panel and separate harness is already made for that and i also have a full msd setup as well...so. what all can i unpin and get rid of....i also want to get rid of the ccrm if that can be done....i have a huge aluminum rad..and id like to get a aftermarket better fan....is there a controller that will work in series to the computer function to turn it on and off or do i need to keep the ccrm box....i have an independant starter switch also if that means i can get rid of the jumper on the trans harness...anyone please chime in and give me some help..i have a pin out assesment in front of me so that will help some...</p></blockquote><p></p>