Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1437098" data-attributes="member: 11896">does it look like this one?<a href="https://www.americanmuscle.com/sr-tb-75mm-9604gt.html?utm_content=Intake%20-%20Throttle%20Body%7CSR%20Performance&utm_source=google-pla&utm_medium=shopping&T5_Var2=shopping&T5_Var3=blue&T5_Var4=41104&intl=0&utm_campaign=AMM+Mustang+Vehicle+Medium&gclid=CPijgN_P8toCFXmOxQIdXYwLwA&gclsrc=ds" target="_blank">https://www.americanmuscle.com/sr-tb-75mm-9604gt.html?utm_content=Intake - Throttle Body|SR Performance&utm_source=google-pla&utm_medium=shopping&T5_Var2=shopping&T5_Var3=blue&T5_Var4=41104&intl=0&utm_campaign=AMM+Mustang+Vehicle+Medium&gclid=CPijgN_P8toCFXmOxQIdXYwLwA&gclsrc=ds</a>As he said there is supposed to be a 2nd spring that goes from that little brass eye/ring on the top right back up to the throttle body bracket.You can probably take this one apart and turn it one more time to try and tighten it up.  If it comes apart like mine did look inside the TB at the blade that turns.  Remove the two screws holding it to the center vain and then you can turn the vain and slide the big round center section out.  After that it just pulls apart.  You can probably take it out an inch and turn it one more time.  But again there is supposed to be a 2nd spring that is what really pulls it back.</blockquote>