Reply to thread

Message: <blockquote data-quote="96PonyGT" data-source="post: 768580" data-attributes="member: 8984"><p>Hey all. I have a vortech 2 trim and a 3.33" pulley and power pipe going through a big 32x12x3 FMIC and I only see 6.5psi of boost. Does that seem low to anyone? And also I used the stock vortech discharge tube to feed into the TB even with the FMIC I just cut the one end off would it make a big difference seeing as that it would be 3" piping all the way until then where it goes down to 2/5" or whatever the discharge tube size is? Im just wondering if that is causing the restriction. Thanks</p></blockquote><p></p>