Reply to thread

Message: <blockquote data-quote="blown98gt" data-source="post: 768668" data-attributes="member: 11284"><p>a 3.33 pulley really isn't that much plus when you are running through a FMIC also remember that boost is just a refrence of restriction the better air flow you have in reality the less boost you'll see.. I mean your FMIC seems a it large but if you want to see a little more boost then put a smaller pulley on. Also you can consider getting a boost pipe which will allow more air in will add a few pounds, but imo i don't think you have a problem with any of the piping. Vortechs seem to loose a bit of boost when a FMIC is added into the mix (from what i've seen) but with cooler air going in means more power. So just keep all that in mind.. hope this helps some</p></blockquote><p></p>