Reply to thread

Message: <blockquote data-quote="white95" data-source="post: 1541822" data-attributes="member: 10188">Great thread.When I had the simple, Baer +1 13” rear rotor kit the bias was always heavily to the rear. Further adding to the problem (that I created) was using 43mm (Taurus) rear calipers and track day pads. Switched to stock pads and it was still rear biased. Initially was going to add a Wilwood bias adjuster but ultimately switched to stock rear brakes/pads. Only then, did the car stop “evenly”.My total set up consists of 97 Cobra hydroboost, 14” rotors and 44/40 Brembo calipers aaaand no ABS (another misstep)</blockquote>