Reply to thread

Message: <blockquote data-quote="2slo95fiveoh" data-source="post: 426595" data-attributes="member: 8966">hey guys. so i recently purchased MM full length subframe connectors. i set the pass. side connector on the pass.frame rail, and everything lined up, the front sub. with the rear sub.. it was all good. then i took the drivers side suband put it up to the drivers side sub. and the front rail was dead on.. but the rear subframe was about 1 inch to the leftof where it was supposed to be. my roomate decided to drop my digital camera from our deck, so pics are out.. but its roughly like this:  |    |  |    |   |    |   |    |I noticed quite a bit of rust, almost all on the drivers side (messed up one) and the metal pad underneath the lower CAis crushed in about 1/2 inch where as the pass. side is level..  and these are 94-04 coupe subframe connectors on my95 gt coupe.  any suggestions??</blockquote>