Reply to thread

Message: <blockquote data-quote="joekd" data-source="post: 999332" data-attributes="member: 11138">The best and quickest way to do it is. Pop the coolant temp sensor out of the intake. Top off the reservoir tank and cap it. Fill through the intake (where you removed the sensor) until it starts to come out. Unscrew the reservoir cap and you will see the coolant in the intake drop a little. Keep doing this until you cannot fill it anymore through the intake. Put the sensor back in and run the car. Usually I wait until the fan comes on then shut the car down. Wait for it to cool then pop the sensor back out and top off if needed.If you fill it through just the reservoir you will get air and the car will overheat</blockquote>