Reply to thread

Message: <blockquote data-quote="Wes8398" data-source="post: 558700" data-attributes="member: 9883">I'm toying with the idea of buying a set of Comp Cam "102300" cams but want to get some opinions before I do something stupid. First off, does anyone know if these can be run withOUT getting a tune as well? Also, many descriptions of these cams state to run a 2000 stall as well as 3.55-3.73 gear. I have the gear, but not the stall; will this cause issues? Lastly, what kind of gains should these cams yeild (without a tune, if possible) considering my other mods (or lack thereof)? Basically, would you say this purchase is a bad idea or a good one? Thanks in advance, and here is the cam info just FYI:Brand:    COMP CamsProduct Line:    COMP Cams Xtreme Energy CamshaftsPart Type:    CamshaftsPart Number:     CCA-102300Cam Style:     Hydraulic roller followerBasic Operating RPM Range:     2,000-6,000Intake Duration at 050 inch Lift:     236Exhaust Duration at 050 inch Lift:     240Duration at 050 inch Lift:     236 int./240 exh.Advertised Intake Duration:     274Advertised Exhaust Duration:     278Advertised Duration:     274 int./278 exh.Intake Valve Lift with Factory Rocker Arm Ratio:     0.500 in.Exhaust Valve Lift with Factory Rocker Arm Ratio:     0.500 in.Valve Lift with Factory Rocker Arm Ratio:     0.500 int./0.500 exh. liftLobe Separation (degrees):     114Intake Valve Lash:     0.000 in.Exhaust Valve Lash:     0.000 in.Computer-Controlled Compatible:     NoGrind Number:     XE274H-14Quantity:     Sold as a pair.Notes:     Fits 2V SOHC engines only.Camshafts, Hydraulic Roller Follower, Advertised Duration 274/278, Lift .500/.500, Ford, Modular V8 SOHC, Pair </blockquote>