Reply to thread

Message: <blockquote data-quote="5.0kid" data-source="post: 512465" data-attributes="member: 10487">I have a 95 gt with some holley systemax heads, 95 cobra intake, and a tfs1 cam. I was wondering if anyone knew enough about cams to help me deciding if i should switch the cam out for the original holley kit cam (lunati) or keep the trick flow stage one.here are the specs:trick flowPart Number: TFS-51402000 Cam Style: Hydraulic roller tappet Basic Operating RPM Range: 2,000-5,500 Intake Duration at 050 inch Lift: 221 Exhaust Duration at 050 inch Lift: 225 Duration at 050 inch Lift: 221 int./225 exh. Advertised Intake Duration: 275 Advertised Exhaust Duration: 279 Advertised Duration: 275 int./279 exh. Intake Valve Lift with Factory Rocker Arm Ratio: 0.499 in. Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.510 in. Valve Lift with Factory Rocker Arm Ratio: 0.499 int./0.510 exh. lift Lobe Separation (degrees): 112 Intake Valve Lash: 0.000 in. Exhaust Valve Lash: 0.000 in. Lunati Duration at 050 inch Lift: 218 int./222 exh. Advertised Intake Duration: 276 Advertised Exhaust Duration: 280 Intake Valve Lift with Factory Rocker Arm Ratio: 0.509 in. Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.509 in. Lobe Separation (degrees): 107Intake Valve Lash: 0.000 in. Exhaust Valve Lash: 0.000 in.</blockquote>