Reply to thread

Message: <blockquote data-quote="Orange 94" data-source="post: 1140110" data-attributes="member: 17635">Okay, I'll try to answer this as best as I can.I would recommend picking up a Haynes manual for an installation guide.1. if i can handle the install Personally I would try to get someone who knows what they're doing to help you the first time. I had a lot of help from my dad, without him I have no idea what to do.2. if it's worth it Yes, but really dependents on future mods...3. if i should do anything else to my engine while i have things off This is a hard question to answer... really depends on your budget and your future plans... there's definitely a lot you could while digging into the motor4. if i should do this before mustang week (while pushing off the interior) No idea on this... really depends on how much experience you/someone helping you has. You have to keep in mind that things never go as plan. So if you decide to do it make sure you have looooootttttssss of time!5. what cam i should get. This I can't answer. Really depends what you're planing for sound, performance, drive-ability and future mods.</blockquote>