Reply to thread

Message: <blockquote data-quote="GDTrumbo" data-source="post: 669236" data-attributes="member: 10665">Hehehehe! Yea, the bushing height itself.  As for the panhard rod kit, there are 3 or 4 kits available from various mfgr's. for various prices. Then there was the 11 hours installation time it took me to install it myself. There are instructions on the MM website. The results are fantastic (except for a little extra axle noise) and I would do it again if I bought another SN/New Edge. Kinda thinkin' about a MACH 1.  There is no other good remedy for the lack of transversal axle control. You could use aftermarket UCA's with stiffer bushings (for drag racing) but the result is unwanted suspension bind on the street or road racing.  Always research your mods thouroughly before you buy.......GT</blockquote>