Reply to thread

Message: <blockquote data-quote="danielson631" data-source="post: 689255" data-attributes="member: 11543">Rob, are you installing just springs or struts as well? if your just doing the springs i suggest using this write up. its what i used and its a lot better then the one above, IMO. i think there was a lot of unnecessary steps such as removing the struts, and in the rear why remove the quad shocks?<a href="http://www.americanmuscle.com/h-r-ss-spring-96-04-install.html" target="_blank">http://www.americanmuscle.com/h-r-ss-spring-96-04-install.html</a>in this write up though, there was no need to remove the rotors. Or the tie rodsi didnt know anybetter so i went and took the tie rods off. one of them didnt want to budge. i was trying forever and banging the **** out of it. then i went to pepboys and for 15bucks picked up a tie rod puller and it did the job with ease.then someone told me i didnt have to remove them. the rotors, i didnt have a breaker bar and i couldnt remove the two bolts, so i just left them on and everything still went smooth.</blockquote>