Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1576012" data-attributes="member: 11896">first question, you realize leds are polarized meaning that there is a - and a + side that needs to be matched up.  First for any lights not coming on remove them, flip them 180 degrees and try again.But these should not be popping fuses even if they are in backwards.  I would first check the harness connection to the gauge panel as it is not uncommon for the copper trace to lift and move and make contact with the one next to it.  Otherwise I would start by inspecting all the wiring and connections I could see.</blockquote>