Reply to thread

Message: <blockquote data-quote="9838stang" data-source="post: 1232450" data-attributes="member: 13575"><p>If it is your door panels, what I did t is took them off and wrapped a few layers of electrical tap on the pieces that hook o the door as we'll as added a thin strip on the door where the wholes on the door itself where those tabs go into. Next off would be to see if the cups/ bezels for the door handle the snap into the door are rattling. If so try to heat up that piece and open the tab a tin tiny bit. To give some extra tension the that piece. Third thing I would look at is the plastic bezel that holds the speaker I place. See if that is starting to rattle. If the rattling is coming from somewhere else I would suggest to find it and come back to ask us on how to approach it. Some other areas I found were the center counsel as well as my glove box door. I forgot to tighten that back up after taking it out</p></blockquote><p></p>