Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1507652" data-attributes="member: 11896"><p>start at fuse 35 in the diagram and follow the line down.  See where the green line splits off to the right labeled "Shift interlock/abs/bla bla bla" and the S272 next to it?  That is the connection I am talking about.  Now if the connection to the interlock is good, but it failed afterwards then we would have the problem we have at hand of it allowing you to put it in drive but the cruise control servo not seeing the signal so it thinks the clutch was pushed even though you do not have one.  I have never laid eyes on these pieces myself and like I said if you can find where connection S272 is listed you could go there to check.</p></blockquote><p></p>