Reply to thread

Message: <blockquote data-quote="68eleanor" data-source="post: 1026972" data-attributes="member: 17270"><p>We used 93 cast aluminum valve covers on my sons 95 GT, Vortech Supercharged, We had to grind al little on the inside with a carbide burr bit,  to clear the Harland Sharp roller rockers, I placed the factory fuel lines on either side of the oil fill It is a tight fit but we did not have to fabricate the oill fill.  and I have clearance for the alternator,  We also used VHT High heat crinkle paint to match the Trick Flow Track Heat Intake, It turned out pretty nice. we had to buy a 3/8 spacer for the intake as well to get some extra clearance,  We tried to run fabricated tall covers, but you would have to buy a 1" spacer to clear those.  Hope this helps  Let me know if you need any more info.  Donnie</p></blockquote><p></p>