Reply to thread

Message: <blockquote data-quote="kennyz" data-source="post: 428494" data-attributes="member: 8578">no problem i hate people that flame people for asking by saying do a search. there are plenty of different way of doing it but i went this wayfronts rims are 15 3.5 with a 1.75 back space with 165 80 15 tire. rear rims are 15.8 i believe the backspace is 5.5? with a 275 60 15 MT drag radial.rears bolted right up no issues with 3" studs . But the front did not i have the 13" cobra brakes so i ordered up longer studs from summit racing and drilled out my front hubs the hardest thing to do was finding the correct drill bit size i ended up getting one from a local Franklin auto parts store and then i got a cheap slip on 1" spacer and they bolted right up  part numbers the front and rear studs i used <a href="http://store.summitracing.com/partdetail.asp?autofilter=1&part=ARP%2D100%2D7703&N=700+115&autoview=sku" target="_blank">http://store.summitracing.com/partdetail.asp?autofilter=1&part=ARP-100-7703&N=700+115&autoview=sku</a>for the spacers i just got them off of good old EBAY.and the drill bit size was a 39/64"</blockquote>