Reply to thread

Message: <blockquote data-quote="redline8300" data-source="post: 1586884" data-attributes="member: 36467">I recently pulled the dash to replace the heater core and during the disassembly, I found that my car had been in an a-pillar accident that damaged one of the interior bulkhead connectors.  Well, the hack spliced out the connector with all red wires.  I split out the wires and added weatherpak connectors.  Upon reassembly everything is working fine beyond the driver's side front turn signal.  Does anyone have a wiring diagram for the turn signals?  My googling is only coming up with blurry copies.  The rear turn signal works but is fast.  I have spliced in a new ground wire but still only have the running light.  When the lights are on, I have a pulse in the lights, but I think that is a separate grounding issue.Do the front running lights run through the bolt up firewall connector or somewhere else?</blockquote>