Reply to thread

Message: <blockquote data-quote="9838stang" data-source="post: 1058467" data-attributes="member: 13575">I have a 98 v6 with gt take offs, and my car back is completely welded in. I have divorced duals, with pyping welded behind the cats and welded to the factory gt catback. I am looking to upgrade my exhaust to a 2.5 magnaflow catback.Now here is the issue, Since i have have the 2.25 factory exhaust welded in place, I am going to cut the welded in portion out to where the catback will "bolt" up to the exhaust. Now since i am cutting the exhaust that is on the car, i am looking to find someway where i can use an adapter to clamp to the exhaust on the car and bolt the magnaflow up to that.Basically looking for an adapter to bolt onto the 2.25" exhaust to bolt up to the 2.5" exhaust, or if i have to cut the flange off the magnaflow and have a 2.25" to a 2.5" adapter that will us the the c clamp bolting way to attach everything.</blockquote>