Reply to thread

Message: <blockquote data-quote="99GreenStang" data-source="post: 1241823" data-attributes="member: 17934"><p>Well I'm running the p heads with new 600 lift springs , and proform 1.6 roller rockers and titanium locks and retainers and viton seals . I can't complain for a cast iron head . On the #7 plug I'm running all straight msd wires and summit special p headers , well what I did like how back in the day on the old flatheads they used to just stick the metal ring around the plug itself , I basically cut my wire into where I could do that and it clips over the end and then I slipped the insulated cover over it and have it also covered with a fiberglass cover to prevent burning wires on the headers . Either way to change the plugs on mine there's not a way to make a socket or any kind of box wrench or anything to change the plugs without removing the headers so that's another reason to get rid of them .. That and an aluminum head will be lighter and make a lot more power . Just can't figure out which heads I wanna go with .</p></blockquote><p></p>