Reply to thread

Message: <blockquote data-quote="94kingcbra" data-source="post: 243516" data-attributes="member: 9140"><p>Yes you should have put a new gasket between the sending unit and the tank....also check the "grommet style" gasket where the filler neck goes into the tank, "I had this problem". Only Ford carries this part, but they should keep them in stock because this is a common problem....If it is you will have to do the same steps that you did to do the fuel pump, except disconecting the lines...and while you are up there check the sending unit for the pump and Gasket, and make sure all is snug....Good Luck!</p></blockquote><p></p>