Reply to thread

Message: <blockquote data-quote="FivepointSlow" data-source="post: 1447616" data-attributes="member: 18995">Still waiting on my harness from TRS but LMR came through with the headlighter adjusters today so the headlights are mounted!First side was a PITA. The bottom outside adjuster was too short so after some fiddling I got it adjusted properly and then matched the other side so I only had to do it once..<img src="https://i.imgur.com/xsjEDW2.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />After installing the 2nd side, I immediatly noticed a problem...<img src="https://i.imgur.com/0z6qzJr.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="https://i.imgur.com/xeDoHcm.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />The shroud popped off and came forward... I took the headlight out and was able to very violently shake the housing around and got the shroud to pop back into place... Only for it to po back out when I closed the hood. I am not entirely sure how I am going to be able to fix this. It seems the only way would be to bake the headlights apart again, but I went over the headlight glue with black weather resistant epoxy and I am not sure how that would react to heat.... IDK i'll have to wait and see how much light leaks through when the lights are on. If it's not a noticeable amount I may just rock it til I do my next set of retrofits (this was the cheap test version cuz IDK what I am doing lol)Was able to wire up the demon eyes though..off<img src="https://i.imgur.com/mWlCteU.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />on<img src="https://i.imgur.com/Q3PRNFX.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />And pulled outside for me to step back and admire<img src="https://i.imgur.com/lCOuF2Q.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="https://i.imgur.com/T59cOU4.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="https://i.imgur.com/yOzM8Ke.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="https://i.imgur.com/SpRXMFq.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Was also able to reglue the weather stripping on the passenger side corner light, so that looks all good now too!Finally I finished repairs on the radio bezel and received a new dash kit and did a final install on the head unit!<img src="https://i.imgur.com/udvutwO.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Tomorrow I will be painting my new center console and doing some vinyl work on the windows... And maybe mounting up the new chin spoiler....</blockquote>