Reply to thread

Message: <blockquote data-quote="FivepointSlow" data-source="post: 1451542" data-attributes="member: 18995">Went to the hardware store for the 1000th time in the last week to get a nut for the rear control arm, and finished those up, and reinstalled my rear sway bar.<img src="https://i.imgur.com/4AdM7CR.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Tossed in the rear coilovers which despite my subwoofer and accompanying wires being in the way they both went in without a problem and have been he most straight forward thing thus far.<img src="https://i.imgur.com/HHfQMVB.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="https://i.imgur.com/1Pkmw9A.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" /><img src="https://i.imgur.com/QkKONjK.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Picked up my hub assemblys from the shop and tossed those in.<img src="https://i.imgur.com/r98Ludt.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Also ordered a brake hardware kit and while I had the caliper off I went through and greased the brackets and replaced the anti rattle clips and pins, in hopes that it stops my noisy front brakes.<img src="https://i.imgur.com/QsQ3IbH.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Then I got a magical call from NAPA that my pump came in, so I shot up there, picked it up, tossed it in (which was a struggle, put it in and forgot to do the bolt behind the line first, so down it came, line off, etc), then tossed the rack in.<img src="https://i.imgur.com/2We04vn.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />Filled with fluid and started the car up and oh boy I have never been so depressed seeing fluid piss out of the bottom of my car...Then I realized I did not replace the seals in the rack lines because I didn't get new seals with the rack I bought... <img src="https://i.imgur.com/btEdhmM.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />So tomorrow the rack comes back out and the lines will get resealed.. Luckily NAPA has a reseal kit in stock for the teflon rings, and I am going to try to see if they have o-rings that will fit aswell...I am OK... I am OK...</blockquote>