Reply to thread

Message: <blockquote data-quote="MustangMatt96GT" data-source="post: 698143" data-attributes="member: 9581">I seen the light... after playing with those modulars... this thing is much quicker for so much cheaper... if it were a DD i still would have done the exact same thing, but I would of rather done it EFI with a 94/95 computer... thing is so much quicker than the 2v ever would have been... even with a blower...Now dont get me wrong if you wanna go slow, stay with the 2v... lol but being 18 I don't have much money so I had to go the cheapr route... after 2 modulars I decided it was too expensive, they just are not built as strong as the pushrods... atleast my pushrod... should be good to over 800 using stock block and crank... with some new rods and pistons in there that should hold up... not only that, but i paid less for my whole engine parts than a set of heads would have cost me for a 2v... my heads are world windsor heads, so if i spent another 1000 bucks on heads, i would see another 50-60 HP... try that with a 2v.</blockquote>