Reply to thread

Message: <blockquote data-quote="96blak54" data-source="post: 1588025" data-attributes="member: 14727"><p>I made ramps from laminated 2x10 boards just so its easier to get any floor jack under the car. I have to use them for all my cars except for the 4x4 suv's. I roll the front up on the ramps, then I go to the rear and carefully jack up on the rearend pumpkin to get the rear high enough to set the 6ton jack stands on the rear end tubes. Then I move to the front, carefully jack it up at the K-member center to get the front up a tad higher than the rear, place the 6ton jack stands. Then back to the rear again jacking up on the pumpkin to get more height, extending the jack stands higher, then back to the front....again for more height. The 6ton jacksatnds can really get the car up and be very stable.</p></blockquote><p></p>