Reply to thread

Message: <blockquote data-quote="cobrajeff96" data-source="post: 1571125" data-attributes="member: 29141"><p>I don't know if you'll have to remove the entire column just to replace the wand. Try removing the steering shroud first and see. But if it comes to that, removing the column is easy. Three little connectors on the passenger side, and two connectors on the drivers (one of them being a big connector held in by a real small captive screw). Then it's just a 10mm bolt for the shaft and four 13mm bolts to remove the whole thing. I think you can't get access to the medium size connector on the driver side until you've at least removed the shaft and loosened the four main nuts quite a bit.</p></blockquote><p></p>