Reply to thread

Message: <blockquote data-quote="ttocs" data-source="post: 1075828" data-attributes="member: 11896">no move the starter wire to the fuse box post where you will slap your power wire as well.You should be ok with 4 awg, 2 would be better and if you have the cash go for 0.  It would also be wise of you to upgrade the ground wires at this time or they will become your choke point as they are only slightly larger then an 8 awg.  You are already upgrading from the batt to the chassis, just upgrade from the chassis to the block and you will be good.  I used the back of one of the bolts for the alt since it is the source and then to the chassis.</blockquote>