Reply to thread

Message: <blockquote data-quote="duff daddy" data-source="post: 1204916" data-attributes="member: 10730">TFS heads cant be ported, A very good friend, and one who is highly respected in the modular cylinder head community has seen time and time again how thin the water jackets are on the TFS heads and that becomes an issue with porting. So if you go tfs, great just DO NOT port. Personally With your car fun being 300+ hp and a mid 12 second car would be ported pi or stock TFS heads, a decent set of cams (if stock heads, then id go with a 270/278 from comp, some springs and get the cams degreed) if its the TFS go with one of their grinds. The top end kit from Trickflow can make great power but I hate that manifold, Its too big, too heavy and holds a shit load of heat, and personally I have yet to see a manifold make better power, hold less heat and be cheaper then a stock PI YET. I am personally not a big fan of MMR stuff. If i wanted my heads ported and Nick didnt do them, they would go to fox lake. /thread.I think that touched everything pretty easily.  If you can make 300 and can drive you can have a mid 12 sec car easy.</blockquote>