Reply to thread

Message: <blockquote data-quote="5PointSnow" data-source="post: 1488508" data-attributes="member: 20591"><p>I just logged on for the first time in years to say that on the stock rails that black part is actually not the hose itself just a heat shield/abrasion hose cover. That is why it slides back and forth so easily, it is sliding on the fuel line which is a harder plastic material. From the factory they had a little plastic ratchet clamp thingy holding it in place. Having said that, it never hurts to check fuel pressure leak down. Also I would still recommend replacing with PTFE AN lines using the Russel adapters when you can. It gives some piece of mind as those stock lines have seen a lot of heat cycles and vibrations since 1995.</p></blockquote><p></p>