Reply to thread

Message: <blockquote data-quote="XxslowpokexX" data-source="post: 1145646" data-attributes="member: 16966">nope all sn95 parts.  Correct transmisison and bellhousing.  The issue now is that  the transmission sits to high  if I were to trim the tunnel the shifter baseplate would sit eabove the metal.  I read somwhere on here that some transmission mounts for some reason are built taller.  Can that be the case. Again everything else is fine except for this new height issue.  GOing to go pick up a poly mount tomorrow and see if there is a height difference.  My buddy has one in his garageAgain thanks!!</blockquote>