Reply to thread

Message: <blockquote data-quote="JerZeyStangz" data-source="post: 884365" data-attributes="member: 8031">I bought 55w ddmtuning HID conversion kit, for my depo smoked projectors. They gave me there generic wiring harness but I didn't use the wiring harness because it doesn't mate to any electrical 9007 factory connector to actually TURN ON the headlights. The ddmtuning kit is a direct connection to the battery, so if install it...my headlights are going to be on every time I turn on the car, this is problem #1. Problem #2. I used my old wiring harness from my old 9007 hi/lo beam hid kit that actually connects to factory connector, and then matted the new ballasts/bulbs to the wiring harness. Now I believe this wiring harness isn't supplying enough power to ignite the ballasts the first try. It takes 1 or 2 tries to make the headlights operate together. Now my question is? Is there anyway I can upgrade my old wiring harness to supply enough sufficient power for these 55w ballasts, or use my new wiring harness but somehow mate it to the oem factory connector so i can actually have a choice to turn on/off my headlights.</blockquote>