Reply to thread

Message: <blockquote data-quote="CC&#039;S95GT" data-source="post: 547575" data-attributes="member: 10547"><p>I'd say to start soaking those bolts in PB Blaster. let it soak in for a couple days.  then clamp on a set of vice grips to the ends of the bolts, as you apply pressure to loosen them, tap on the end of the bolts with a hammer. use more tapping than turning.  your essentially making your hands into an impact. sometimes if you turn the bolt back and forth it will also come loose. you might want to remove the rad. if you haven't already. good luck</p></blockquote><p></p>