Reply to thread

Message: <blockquote data-quote="LI98GT" data-source="post: 280763" data-attributes="member: 8068">Nice write-up torres. I would only add that I used a pry bar on the stock spring in the front to persuade them out of the perches and that for the rear I borrowed a second jack to assist in aligning the rear with the bolt holes for the shocks, while the other jack had a good firm hold supporting the rearend.I like to work on my car, which is what motivated me to do the install, but I can see if you don't have all the tools and space, having it done at the shop. It's not too hard of a job really. And I would do the LCAs at the same time as the springs have to come out again when those get swapped out.Good luck on the install and make sure you post updated pics and your impressions when your done.</blockquote>