Reply to thread

Message: <blockquote data-quote="lwarrior1016" data-source="post: 1497232" data-attributes="member: 20210">After the guide is on, we will install the primary chain by lining up the colored links with the alignment marks on the cam gear and crank gear. Make note of the L and R on the phaser sprocket. They are not side specific but have to be timed for the side they are on. This being driver is L side. If the cams were installed like shown earlier, the timing mark will be in the correct location. [ATTACH=full]15246[/ATTACH]Timing on the crank gear [ATTACH=full]15247[/ATTACH][ATTACH=full]15248[/ATTACH]After the chain is installed, you will put the tensioner arm in and the the hydraulic tensioner. [ATTACH=full]15249[/ATTACH]Now the timing for the Left side is complete.</blockquote>