Reply to thread

Message: <blockquote data-quote="mark8796" data-source="post: 213258" data-attributes="member: 8552">got code p0306 (cylinder 6 misfire detected). i already swapped plugs, wires, and coil packs (they needed to be changed anyway)...no change. i think next culprit is injectors. all info i've seen points to them (stumbling idle, stumbling under light acceleration, prior p0300 code, which i had) so, i was either gonna do:install 30# injectors (already bought 2 years ago, just never installed them yet) or:take the car to shop for injector cleaning where they run a solvent thru the fuel lines to clear up the varnish that can collect on the inj (car sat for 3 months while i took my time on pi cam/intake, and x, y, z swaps), and if that doesn't fix, then clean the injs off the car in a tank and flow test them.questions: if i install the 30#ers, which i would plan on doing anyway someday soon after i clear the miss, will the car run like as, if at all until i can get to the dyno tune dudes? this way i can skip the injector cleaning all together.what do you think?</blockquote>