Reply to thread

Message: <blockquote data-quote="Dalamar" data-source="post: 7228" data-attributes="member: 8116">Looks like fun Alitle8 - good luck with the mod.Are you going to do any porting?I mentioned above, my cuz has a 98 with a vortec SQ blower on it.He's pushing 8# of boost, all stock motor with long tubes. and wants more power.So I did some research for him.He decided to do the whole PI swap, but here's what I found about the intake swap.1a- PI intake swap without adaptor kit - gains 18 rwhp NA. (naturally asperated)To do this, you will need the following parts:XW7Z-9439-AA intake gskt $6.08 eaF8AZ-10153-EA alt brkt $10.53XR3Z-18B402-AA coolant tube $19.67F1VY-8255-A thermstat housing o-ring $3.83F1VY-8507-A water pump o-ring $2.43XR3Z-9L437-BA upper plenum o-ring $3.05F75Z-8555-AA coolant tube nipple $5.731b- PI intake swap with adaptor kit - couldnt find dyno results but I'm sure it's a little more power because there's nostep inside the runner where it meets the head - resistance.Livernois has a kit for just an intake, or their swap kit with the adaptors, and all the parts.Heres a good link on the process: <a href="http://www.redpulsar.us/~coldfusion/intakeswap.html" target="_blank">http://www.redpulsar.us/~coldfusion/intakeswap.html</a>Good luck.</blockquote>