Reply to thread

Message: <blockquote data-quote="Mustang5L5" data-source="post: 1536393" data-attributes="member: 30520">Here’s some more pics of the 9W7Z-9424-A manifold compared to a take-off ‘01-04 stock manifold.Stock intake on left.  My stock intake does have a broken wire loom tab at the rear center of the intake, so ignore that.[ATTACH=full]31662[/ATTACH][ATTACH=full]31663[/ATTACH]There is a foam insulator on the bottom of the Vic/Lincoln intake, which is why it looks different in the above pic.  Also, the orange coloration around the coolant ports on the stock PI intake is because it's a used part, and that's staining from the coolant. But it can be removed.  Here’s with the insulator removed on the 9W7Z-9424-A manifold[ATTACH=full]31664[/ATTACH]with insulator removed.[ATTACH=full]31665[/ATTACH]They are the same.  Same molding marks and features and such.  No differences aside from the lack of drilled ECT port.  The insulator can be removed so not really a difference.  Forgive my lack of zooming in on specific areas because there’s really nothing to show other than the crossover.</blockquote>