Reply to thread

Message: <blockquote data-quote="ReplicaR" data-source="post: 326673" data-attributes="member: 9209">Look over the installation instructions very carefully. When you get to the section about spacer install, you will see that there is a note about installing spacers on the Tokico 3026 series shocks (Fox HP Blue), but you said that you are running SN95 series, so you can disregard that. The real question is, are you running lowering springs?If you do not have lowering springs on the car, you are supposed to use one small/two large spacers underneath the spherical bushing, and one small spacer on top. The setup would look like this.<img src="http://i31.tinypic.com/344b2hh.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />If you lowered the car, you are supposed to use one small spacer underneath the spherical bushing, and one small/two large spacers on top. The setup will look like this.<img src="http://i32.tinypic.com/n3w5rc.jpg" alt="" class="fr-fic fr-dii fr-draggable " style="" />You must use all FOUR spacers not three.</blockquote>