Reply to thread

Message: <blockquote data-quote="94kingcbra" data-source="post: 444450" data-attributes="member: 9140"><p>I would get some hardened push rods and ask whoever sent your heads for the recommended length, make sure you tell him the ratio for your rockers and the lift and duration of your cam. Also make sure your valve covers will clear those studs especially if you get a rocker arm girdle. If you require taller valve covers you might need a spacer between the upper and lower intake manifold. And if you need a spacer for the intake you will need to extend the egr tube if you still have it... Good Luck!</p></blockquote><p></p>