Reply to thread

Message: <blockquote data-quote="jthorn9" data-source="post: 600004" data-attributes="member: 11544">My chrome radiator hose is by MAC and I bought it from <a href="http://www.mustangsunlimited.com" target="_blank">www.mustangsunlimited.com</a><a href="http://" target="_blank">http://</a>It's both the upper and lower in the kit, but I only used the upper for show as you can't really see the lower and I don't want it getting pelted by rocks or something and risk it blowing.I've seen some people run the stock upper hose and the belt not touch the hose. Mine comes very close to the chrome hose, but it does clear with about 3/4" of clearance, so it's enough. There is an elbow fitting that comes with the Kenne Bell kit so that you can splice the hose and clamp it down so that it will fully clear the belt. In short, try the stock hose as it sits, it will probably clear the belt with no isses. My chrome hose is built exactly the same as a stock, and other than the fact it's a little smaller in diameter, it clears with no problems.</blockquote>