Reply to thread

Message: <blockquote data-quote="CC&#039;S95GT" data-source="post: 765533" data-attributes="member: 10547">I was able to push the wires backwards out of the old connector by using a jewlers screwdriver to unlock barb on the end. I was able to swap all this way with the exception of 1 wire because the plastic was melted so bad it wouldn't push out. (that one I cut and spliced in)Only do 1 wire at a time so you don't get them in the wrong place. All of the colored wires on the oem pigtail have an exact match on the replacement pigtail.You'll have a couple extra wires too on the new pigtail so after everything is switched over either romove the extras or tape up the ends.I got pigtail connector and light sw from O'reilly's.</blockquote>